UN874028484/30 | CS34P BLK C6 4/23 F/UTP RL 3KFT

Base Product: CS34P

CS34P Category 6 F/UTP Cable, plenum, black jacket, 4 pair count, 3000 ft (914 m) length, reel

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Specifications

Product classification

Product Number	CS34P
ANSI/TIA Category	6
Cable Component Type	Horizontal
Conductor Type, singles	Solid
Conductors, quantity	8
Drain Wire Type	Solid
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| ISO/IEC 11801 Class E

Cable Length	914.4 m \| 3000 ft
Diameter Over Insulated Conductor	1.08 mm \| 0.0425 in
Diameter Over Jacket, nominal	6.934 mm \| 0.273 in
Jacket Thickness	0.457 mm \| 0.018 in
Conductor Gauge, singles	23 AWG
Drain Wire Gauge	26 AWG

Click on image to enlarge.

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	71 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Pulling Tension, maximum

11.34 kg | 25 lb

Cable weight

56.848 kg/km | 38.2 lb/kft

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Product Number	CS34P
ANSI/TIA Category	6
Cable Component Type	Horizontal
Conductor Type, singles	Solid
Conductors, quantity	8
Drain Wire Type	Solid
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| ISO/IEC 11801 Class E

Cable Length	914.4 m \| 3000 ft
Diameter Over Insulated Conductor	1.08 mm \| 0.0425 in
Diameter Over Jacket, nominal	6.934 mm \| 0.273 in
Jacket Thickness	0.457 mm \| 0.018 in
Conductor Gauge, singles	23 AWG
Drain Wire Gauge	26 AWG

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	71 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating	300 V

Pulling Tension, maximum

11.34 kg | 25 lb