CU8919-000 | FIST-SOSA2-4DC-S

Available in:
EMEA

FIST® Splice Sub-assembly kit with 4 foldable dual circuit trays, each for holding up to 2x2 primary coated fibers, with Heat Shrink type splice holder

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Groove plates are designed with slots for routing fiber to and from the organizer trays
Loop-back facility allowing for single circuit uncut looped fiber storage on the splice tray
Compliant with most splice types and independent of any optical fiber construction
Splice sub-assemblies consists of a wraparound groove plate holding the included splice organizer trays
VAMs help enhance optical transport systems by providing flexible, easy to incorporate optical components into the network
Can be ordered individually or with a UTP pigtail, in plenum or low smoke zero halogen (LSZH) options
Available with flat dielectric up to 24 fiber or flat toneable/locatable up to 12 fiber. Terminals can be used as a distribution point within a network or as a final multifiber drop terminal where more than a single fiber is required to service an SFU or cellular tower

Specifications

Product classification

Regional Availability	EMEA
Product Type	Fiber splice tray
Product Brand	FIST®
Product Series	FIST-SOSA2

General Specifications

Application	For use with BUDI fiber wall boxes \| For use with FIST fiber splice closures \| For use with FIST fiber splice panels
Color	Gray
Splice Tray Construction	DC (Foldable dual circuit tray for up to 4 primary coated fibers)
Splice Tray Included, quantity	4
Splices per Tray, quantity	4
Used UMS Units, quantity	1

Dimensions

Height	4 mm \| 0.157 in
Width	105 mm \| 4.134 in
Length	152 mm \| 5.984 in
Fiber Storage Length, maximum	1200 mm for 250 µm fibers
Fiber Storage Length, minimum	900 mm \| 35.433 in
Splice Protector Length, maximum	47 mm \| 1.85 in
Splice Protector Length, minimum	43 mm \| 1.693 in
Splice Protector Diameter, maximum	2.6 mm \| 0.102 in
Splice Protector Diameter, minimum	2.2 mm \| 0.087 in

Dimension Drawing

Click on image to enlarge.

Material Specifications

Material Type

PC/ABS

Mechanical Specifications

Minimum Bend Radius, standard

25 mm | 0.984 in

Environmental Specifications

Storage Temperature	-40 ºC to +70 ºC (-40 ºF to +158 ºF)
Relative Humidity	93%, non-condensing
Environmental Space	Indoor \| Outdoor

Packaging and Weights

Packaging quantity	1
Packaging Type	Bag \| Carton
Weight, net	0.1 kg \| 0.22 lb

Regulatory Compliance/Certifications

Agency	Classification
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS	Compliant
UK-ROHS	Compliant