850376-000 | FIST-SOSA2-5R4/8-S

FIST® Splice Sub-assembly kit with 5 trays, each for holding up to 2 4-strip ribbon or 1 8-strip ribbon fibers, with Heat Shrink type splice holder

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Groove plates are designed with slots for routing fiber to and from the organizer trays
Loop-back facility allowing for single circuit uncut looped fiber storage on the splice tray
Compliant with most splice types and independent of any optical fiber construction
Splice sub-assemblies consists of a wraparound groove plate holding the included splice organizer trays
Available in a pigtail version for splicing on frame or preterminated to 24-fiber microcable or conventional IFC cable
*Product complies with the Build America, Buy America Act (BABAA) requirements of the Infrastructure Investment and Jobs Act of 2021 (Pub. L. 117- 58, §§ 70901-70953), or is the subject of a waiver approved by the Secretary of Commerce or designee. Compliance requirements and waiver applicability vary based on government funding program. Check the laws and regulations for your specific program.

Specifications

Product classification

Application	For use with BUDI fiber wall boxes \| For use with FIST fiber splice closures \| For use with FIST fiber splice panels
Color	Gray
Splice Tray Construction	R4/8 (for up to 2 ribbon 4 or 1 ribbon 8 strips)
Splice Tray Included, quantity	5
Splices per Tray, note	1 mass splice (8-ribbon) per tray \| 2 mass splices (4-ribbon) per tray
Splices per Tray, quantity	3
Used UMS Units, quantity	2

Height	8 mm \| 0.315 in
Width	104 mm \| 4.094 in
Length	152 mm \| 5.984 in
Fiber Storage Length, maximum	2050 mm for 4-ribbon fibers \| 2050 mm for 8-ribbon fibers
Fiber Storage Length, minimum	650 mm \| 25.591 in
Splice Protector Length, maximum	45 mm \| 1.772 in
Splice Protector Length, minimum	35 mm \| 1.378 in
Splice Protector Diameter, maximum	5 mm \| 0.197 in
Splice Protector Diameter, minimum	3.5 mm \| 0.138 in

Click on image to enlarge.

Material Type

PC/ABS

Minimum Bend Radius, standard

30 mm | 1.181 in

Agency	Classification
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS	Compliant
UK-ROHS	Compliant

Application	For use with BUDI fiber wall boxes \| For use with FIST fiber splice closures \| For use with FIST fiber splice panels
Color	Gray
Splice Tray Construction	R4/8 (for up to 2 ribbon 4 or 1 ribbon 8 strips)
Splice Tray Included, quantity	5
Splices per Tray, note	1 mass splice (8-ribbon) per tray \| 2 mass splices (4-ribbon) per tray
Splices per Tray, quantity	3
Used UMS Units, quantity	2

Height	8 mm \| 0.315 in
Width	104 mm \| 4.094 in
Length	152 mm \| 5.984 in
Fiber Storage Length, maximum	2050 mm for 4-ribbon fibers \| 2050 mm for 8-ribbon fibers
Fiber Storage Length, minimum	650 mm \| 25.591 in
Splice Protector Length, maximum	45 mm \| 1.772 in
Splice Protector Length, minimum	35 mm \| 1.378 in
Splice Protector Diameter, maximum	5 mm \| 0.197 in
Splice Protector Diameter, minimum	3.5 mm \| 0.138 in

Material Type

PC/ABS

Minimum Bend Radius, standard

30 mm | 1.181 in

Click on image to enlarge.

Agency	Classification
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS	Compliant
UK-ROHS	Compliant