884077594/10

Base Product: CS31Z

CS31Z3 Category 6 U/UTP Cable, low smoke zero halogen, blue jacket, 4 pair count, ANATEL, 1000 ft (305 m) length reel-in-box

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Specifications

Product classification

Regional Availability	Latin America
Portfolio	NETCONNECT®
Product Type	Twisted pair cable
Ordering Note	CommScope® standard product in Mexico, Central America, and South America

Product Number	CS31Z3
ANSI/TIA Category	6
Cable Component Type	Horizontal
Conductor Type, singles	Solid
Conductors, quantity	8
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Supported Application	1000BASE-T \| 1000BASE-TX \| 100BASE-TX \| 10BASE-T \| 155Mbps ATM \| TP-PMD \| Token Ring \| VoIP
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| IEC 61156-5 \| ISO/IEC 11801 Class E

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	0.98 mm \| 0.0386 in
Diameter Over Jacket, nominal	5.751 mm \| 0.2264 in
Conductor Gauge, singles	23 AWG

Click on image to enlarge.

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	68 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Propagation Delay, maximum	536 ns/100m @250MHz
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Minimum Bend Radius Note	4 times the outer cable diameter
Pulling Tension, maximum	11.34 kg \| 25 lb
Transportation Vibration Standard	ISTA-1A

Cable weight

38.692 kg/km | 26 lb/kft

Agency	Classification
CHINA-ROHS	Below maximum concentration value
ROHS	Compliant
UK-ROHS	Compliant

Regional Availability	Latin America
Portfolio	NETCONNECT®
Product Type	Twisted pair cable
Ordering Note	CommScope® standard product in Mexico, Central America, and South America

Product Number	CS31Z3
ANSI/TIA Category	6
Cable Component Type	Horizontal
Conductor Type, singles	Solid
Conductors, quantity	8
Note	All electrical transmission tests include swept frequency measurements
Pairs, quantity	4
Separator Type	Isolator
Supported Application	1000BASE-T \| 1000BASE-TX \| 100BASE-TX \| 10BASE-T \| 155Mbps ATM \| TP-PMD \| Token Ring \| VoIP
Transmission Standards	ANSI/TIA-568.2-D \| CENELEC EN 50288-6-1 \| IEC 61156-5 \| ISO/IEC 11801 Class E

Cable Length	304.8 m \| 1000 ft
Diameter Over Insulated Conductor	0.98 mm \| 0.0386 in
Diameter Over Jacket, nominal	5.751 mm \| 0.2264 in
Conductor Gauge, singles	23 AWG

Characteristic Impedance	100 ohm
dc Resistance Unbalance, maximum	5 %
dc Resistance, maximum	8 ohms/100 m \| 2.438 ohms/100 ft
Delay Skew, maximum	45 ns
Dielectric Strength, minimum	1500 Vac \| 2500 Vdc
Mutual Capacitance at Frequency	5.6 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	68 %
Operating Frequency, maximum	250 MHz
Operating Voltage, maximum	80 V
Propagation Delay, maximum	536 ns/100m @250MHz
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Minimum Bend Radius Note	4 times the outer cable diameter
Pulling Tension, maximum	11.34 kg \| 25 lb
Transportation Vibration Standard	ISTA-1A